I3 firmware 3.20

mars.1 · Lifetime Member Joined: Apr 27, 2006 Posts: 133

Let me just point out that i never upgraded to versions 3.0 or 3.10 when they was released. Is this the reason why my unit works on filmware 3.20.

Lester_Burnham · Frequent Visitor Joined: Oct 17, 2005 Posts: 618

trevf · Regular Visitor Joined: Jan 24, 2006 Posts: 174

Almahadeus · Frequent Visitor Joined: Aug 06, 2005 Posts: 346

Also people seem to be confusing units that come with transflash WITHOUT maps (maps installed on internal memory) with units with a transflash card WITH the maps installed on the card itself.
Reading through these posts it seems that units with the MAPS ON THE TF CARD (will have audio version 2.0) are suffering with the software bug.

nitelife · Posted: Tue Sep 26, 2006 5:57 pm Post subject:

Almahadeus · Frequent Visitor Joined: Aug 06, 2005 Posts: 346

typan · Occasional Visitor Joined: Apr 07, 2006 Posts: 7

Well mine has maps on internal memory so is the newer version and poi's on card, this was my first upgrade from 2.70 and it didn't like it. I can't see any pattern as to why some work and others don't. Confused

nitelife · Posted: Tue Sep 26, 2006 10:57 pm Post subject:

snowboardcriminal · Posted: Tue Sep 26, 2006 11:06 pm Post subject:

Have to agree with Nitelife, i have also removed the card and am prompted to load maps, but i can still load poi's to internal memory, put the card back in and eh voila, all working as it should, and audio version 2.50.
Now also running FW 3.20 no problems so far and much improved searching for poi's.

Incidentally mine was originally destined for the French market as when registered with garmin it says so, but only bought 1 month ago.
_________________
Don't eat yellow snow
i3, on the middle of the dash, works just fine!

There are things that I know and you don't know, there are things that you know that i don't know, but always remember there is much that we both don't know.

timber · Posted: Tue Sep 26, 2006 11:17 pm Post subject:

zogman · Posted: Wed Sep 27, 2006 9:59 am Post subject:

Almahadeus, sorry mate you're wrong...i to have mapping on the card and audio version 2.5...and having had problems with v3.20 i went back to v2.7, still retaining audio v2.5.......
_________________
***************************

nitelife · Posted: Wed Sep 27, 2006 10:36 am Post subject:

PaulB2005 · Posted: Wed Sep 27, 2006 12:28 pm Post subject:

Going back to 2.7 to see if i'm imagining the lag in map mode.....

Coaster2 · Posted: Wed Sep 27, 2006 2:40 pm Post subject:

I've tried all versions from 2.7 and have always gone back to 2.7.

Upgraded to 3.2 last week and, when I first used it, thought 'back to 2.7 again'.

I had the map freezing, the speedo freezing and the only way to get it going again was to switch off and restart. Was also getting 'low battery' warning so I wondered if that could be the problem.

Recharged the batteries and, since then have had no problems at all apart from the odd slow map update but no worse than 2.7. I shall now be sticking to 3.2. (for the time being :D )

suby786 · Occasional Visitor Joined: Jan 18, 2006 Posts: 9

yeh ive noticed that 2

i was on 2.70 and now i upgraded to 3.20,

in map mode, it either works REALLLLY WELLL or it locks in 1 position sometiomes when im far up the road, pressing back and reloadin VIEW MAP unlocks it, but it can be annoying, but at most times it works really good

also in nav mode, when u press start navigating, the screen goes white (after its 100% routed), the directions at top are accurate but it takes a change in the map route for it not to be white. (3d mode)

i.e. if im on a roundabout when it reaches 100%, it will stay white until the next instruction, i.e. coming off the roundabout

this didnt use 2 happen on 2.70

has any1 else experienced this?

	PocketGPS
	Web