Problems with lock on the B2

a17esh · Occasional Visitor Joined: May 17, 2006 Posts: 5

Thought id shre this with you guys with problems!

I had a problem with my B2 locking, it was the cradle not holding the b2 in properly as it looses the tight fitting after awhile:

Cure - rubber band, did the job for a bit to hold the B2 down in place. It needs to be pushed down on the right hand side!

But also, teh back of the b2 you have a square retangle where the crade sits onto, Add some electrical tape to it, i needed about 3-5 layers, it should then slot onto the cradle and fit tight. Does this make sence - does to me. maywork for some of you i hope![/img]

DenzB · Occasional Visitor Joined: Jan 21, 2007 Posts: 5

Thanks for the info, my B2 is now doing the same.

Keeps reseting as if its loose on the cradle.

Will try your advise and see how its goes

Thanks DenzB

Fraserp · Posted: Fri Mar 23, 2007 5:38 am Post subject:

DenzB
I had the same, spoke to Origin, they replaced the magnets FOC and the problem was resolved.
_________________
Fraserp
TomTom 1000
GPSmap 60CSx
SatMap

DenzB · Occasional Visitor Joined: Jan 21, 2007 Posts: 5

Thanx for the info and sorry for the delay with my reply.

Sent unit back to Origin for repair under warranty, seems to work Ok now.

fingers crossed

DenzB Smile

JamesJamz · Posted: Sat Feb 16, 2008 11:36 pm Post subject:

Im also having a problem with my unit ATM... When the laser is activated, the unit keeps resetting itself for some reason...

Anyone else come across this?

	PocketGPS
	Web