TomTom x10 new mount - is it ok?

[mwfox]

So does the new Tomtom x10 mount fix all the problems with the old one?

1. Disconnections (so you don't need the software update) - plus disconnections of other things such as TMC plugged into the mount.
2. Drooping.
3. any other problems.

[westentertainer]

my new mount i have been using for the last couple of months no droop,no disconections at all ,no falling off screen, sa for rds tmc ,if i could find one i would let you know ,but you have as much chance as meeting salmon rhusdy in tescos!!!

[TonyHoyle]

Mine still falls off if the sun heats the windscreen... other than that it's OK.

[aycer]

Just recieved a new mount. TT seems to sit better but it still droops , infact worse than the original! I read somewhere that a forum user had taken his apart and stretched the spring. I am looking at the mount now but can figure out how to take it apart, any suggestions??

[aycer]

Sorry that should say can't take it apart

[Pedro2NR]

Go to this link and skip to the 5th step fo the instructions. You don't need to do steps 1 - 4.

[pete1336]

[aycer]

Thanks Pedro great post, off to do some prying! :D

[totalsolutions]

Hi TonyHoyle

Try this, Make sure to wipe the screen and mount base, any dirt, grease, tiny fluff or hair will let air into the glass contact area. Also push the mount onto the glass to remove most of the air and then lock on. Any air trapped heats up and e x p a n d s when hot pushing the mount off the screen.

We see you’re using an ad-blocker. We’re fine with that and won’t stop you visiting the site.
Have you considered making a donation towards website running costs?.
Or you could disable your ad-blocker for this site. We think you’ll find our adverts are not overbearing!