Unlocking your iCN510 for FULL WINCE use!!!!

Springer · Posted: Sun Oct 30, 2005 3:15 am Post subject:

Nevermind!! Embarassed

I think it needed a restart. Working now.

Thanks again to all for the great tips.

:D

Radek · Occasional Visitor Joined: Oct 30, 2005 Posts: 3

Hi, I really want to get this up and running but I’m still having problems accessing the registry on my 510….tried all suggestions re disconnecting, resetting, etc but Registry Workshop (or other similar apps I’ve tried) wont recognise it. Any suggestions? Thanks.

Dilemma · Regular Visitor Joined: Sep 05, 2005 Posts: 130

You will need to give me a little info before I can help.

Springer · Posted: Sun Oct 30, 2005 11:05 pm Post subject:

Radek · Occasional Visitor Joined: Oct 30, 2005 Posts: 3

Springer, thanks for these beautiful step-by-step instructions. All working now!

scrivomcdivo · Occasional Visitor Joined: Sep 15, 2005 Posts: 30

Could anyone provide the direct link for GPSpassion? I have gone to the site, but can't find the instructions within the site

nortonbeak · Posted: Wed Nov 02, 2005 8:49 pm Post subject:

http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=35945

Hope this helps

UpAllNight · Occasional Visitor Joined: Jan 11, 2005 Posts: 13

After using TT5 on my icn510 for the past few weeks(Thanks to this guide!), I can safely say i'm never going back!! I get GPS locks much, much faster (under 2 min even when moving, as opposed to about 2 min when stopped and 10+ minutes when moving while using smartst), there are far better routing options, the voices are louder/clearer, and the software is just more inituitive, more powerful, and easier to use overall. The only shortcoming is that (to the best of my knowlesge) there is no way to log routes.

navmanguy · Occasional Visitor Joined: Nov 02, 2005 Posts: 11

Do you have to have a 128mb card to install tt5 on the icn520?
Dont think the original sd card is that high.
Can you delete the navman data from it and install the tt data to be able to fit it on?

navmanguy · Occasional Visitor Joined: Nov 02, 2005 Posts: 11

Clogs · Occasional Visitor Joined: May 02, 2005 Posts: 12

Hi,

Has anyone found software suitable for 510 use under WINCE which gives a GPS capability where you can load co-ordinates and an arrow points in the right direction ?

RobM2208 · Occasional Visitor Joined: Oct 20, 2005 Posts: 8

Hi all
I have read through this entire thread and been fascinated if somewhat confused. The original thread named a guy called Alex and a link to a site. Having just bought my Navman 520 (yesterday) due to TT go being far more expensive I would like to know a couple of things.
1. Does the link to the site unloock the navman only and if so do you then need to add a different OS onto it to allow you to install TT5
2. Does the link give you a copy of TT5 or do you need to acquire this elsewhere
3. Is the card I have in the Navman an SD card or MMC card as TT5 needs an SD card
4. I have an SD card with TT5 installed in my PDA. Can I just unlock the Navman and then swap cards to get TT5 on the Navman or is there some install/config work I need to do also

Any help greatly appreciated

Rob

mbriody · Occasional Visitor Joined: Nov 08, 2005 Posts: 19

I am using pr24's hack (from GPSPassion) and can get TomTom 5.1 running on my ICN 510.

Of course this is lost whenever I do a cold reset. What I am trying to do is create a backup on SD (512Mb) which I can copy back over using FileMan after a reset without having to use a PC. This is almost but not quite working.

When TomTom is working I have the following in main memory:

\Program Files\Navigator\data.chk
\Program Files\Navigator\navigator.cfg
\Program Files\Navigator\TomTom Navigator.exe

\TomTom\go1108m.wav
\TomTom\tttoday.bmp
\TomTom\tttoday.dll
\TomTom\tttodayvga.bmp
\TomTom\TomTom\data04.chk
\TomTom\TomTom\data04.chk

and my maps are stored on the root of the SD.

I took a backup copy of these directories onto SD. My restore sequence is as follows:

1. reset the machine - Navman is reinstalled and pr24's menu app is started.
2. run Fileman and delete \Program Files\Navman to make some space in main memory.
3. copy \program files\Navigator and \TomTom backups from SD to main memory.
4. Use FileMan to launch TomTom.

This starts up okay but instead of going into the app it starts at the agreement screen and when I select okay it locks up.

There is obviously something I am missing.

Anyone got any ideas?

mrg2003 · Posted: Fri Nov 18, 2005 11:04 pm Post subject: navman 510 tt5 restore

I've tried sprite backup, sprite clone and HP backup/restore. AFAICT it should wouk, but it hangs. I suspect a crc failing on the navman installer, if it detects the run key is changed. I can do a cradle restore that works 6/10, but
1. it takes ages
2. If you need the lead, you might as well re-install from the PC anyway.

Not much help, sorry.

scoobynutter · Occasional Visitor Joined: Nov 22, 2005 Posts: 1

hi all new to this forum looks like there some great stuff going on here .i got a navman icn 520 and got the menu all up and running but am struggling with how to put tomtom5 on there any help would be great
cheers paul

	PocketGPS
	Web