MDPNA100 with TT% how to get sat signal displayed - Help

gimly · Occasional Visitor Joined: May 04, 2005 Posts: 11

I am still after a solution to my final problem, TT5 works brill with my MDPNA100 but I still haven't got the Satellite signal to be displayed. Crying or Very sad

Can anyone help as to what to do to get this working.

Thanks in advance :D

Gimly

shaunokeefe · Posted: Fri Jul 15, 2005 5:26 pm Post subject:

Could you tell me what version and everything you are using so I can install it on mine?

Tried lots and either doesnt work or get blank screen Sad

gimly · Occasional Visitor Joined: May 04, 2005 Posts: 11

I have got this working now, following guidance from everyone.

Download this programme http://www.pocketgpsworld.com/modules.php?name=Downloads&d_op=viewdownload&cid=8

Install CE Version

install it - get it talking to your PDA - once connected click on Tools/command/NMEA and change the following setting to reflect the setting below:

GGA 1 VTG 1
GLL 2 MSS 2
GSA 5
GSV 5
RMC 1

with all the User entries as 0.

Notice the baud rate and com NO. that it is connected too

Hit OK, completely exit and kill GPS Monitor

Open up TOM TOM then click on the satelllite signal bars to get to GPS status, now click configure and select Other Cable NMEA GPS, and select the com No. and baud rate that you noted from winfast navigator and bobs your uncle, fanny's your aunt it is now working.

If you do not understand what to do PM me amd I'll do it step by step for anyone who wants to get TOM TOM 5 fully working on medion MDPNA100

shaunokeefe · Posted: Sat Jul 16, 2005 7:02 pm Post subject:

Mines the MDPNA 200 and doesnt work :-(

	PocketGPS
	Web