netless Occasional Visitor
Joined: Jun 13, 2005 Posts: 2
|
Posted: Mon Jun 13, 2005 4:20 pm Post subject: I need Help, I might have killed my 9537!!! |
|
|
I'm damn frustrated, I have a 9537 BT for two weeks now which has been working just fine. I own a iPaq 4150 and I was using bt com port 6 to connect TT3 and the GPS. Never got it connected with Leadtek's GPSMonitor, couldn't select in GPSMonitor the right port in my iPaq (com6). Since I was lacking bluetooth connection in my desktop, I bought this weekend (damn) a bluetooth dongle and ran GPSMonitor not intending to change nothing, but just to take a look and to do a cold reset. I might have done something wrong because now can't get the unit to work either with GPSMonitor or TT3. The problem is that I have no ideia about what I might have done, I still can connect the bluetooth, light becomes steady blue, the GPS flashes the green (fix) but neither the my desktop, pda and even tried a laptop, manages to comunicate with the GPS although port configuration is ok. In GPSMonitor in the right down corner there's two lights, the left one indicates comunication going to GPS, I think this is the trouble, sometimes I see it going on and doesn't go off, the receiver indication is flickering constantly, aparentely I managed to break the ability for the receiver to accept my commands. I also notice the in TT3 GPS status there was normally a indication between the satelite dish simbol and the pda (growing bar indicating comm) which now is dead. I connected via windows hyperterminal and I can get a continuous bursts of data coming from the GPS.
Any ideias from any of you? Is there any reset or command that I can use to try to bring this thing to the living again or must I kick myself for being such a damned stupid?
Thanks for your patience.
DM |
|