Royaltek RFG-1000 & TomTom 2

Deloreanone · Occasional Visitor Joined: Mar 23, 2004 Posts: 2

Hi,

Could somebody tell me how to configure the RFG-1000 (Onyx) GPS Mouse for TomTom...???

I have installed the Trimble Driver, and it has installed the mouse on a "virtual" Com6...

This works,

But how do i get TomTom to see the GPS mouse, i have no option there for the RFG nor Com6, just Serial Com1, com3, GPS Port and APP Port...

Or do i need to select nmea or sirf orso???

Thank you for your help!!!!

Dave · Posted: Wed Mar 24, 2004 2:09 pm Post subject:

I can't remember which driver I used, but if you set TomTom to NMEA 0183v2 4800 and check the second box and see what you have available. There should be an entry there you can use. I don't think it will be APP Port, or GPS Port but it might be the latter.

Let me know what you see in this bottom box.

Deloreanone · Occasional Visitor Joined: Mar 23, 2004 Posts: 2

Hi Dave,

Thanks for the quick response...

You are correct NMEA 0183v2, 4800, the correct port is GPS

The trick for me was that i should use the GPS driver included with my PDA (Yakumo Delta), it installs with destinator. After that Tomtom runs just fine...

I couldn't however use the driver found on the website of Royaltek,
i guess Yakumo has modified the driver!

Works great now, thank you!

	PocketGPS
	Web