Mio P350 (P550) Settings

[Border_Collie]

I've been following this Post http://www.pocketgpsworld.com/modules.php?name=Forums&file=viewtopic&t=41854 and thought I would start a new one to add our info. and hopefully all end up with the ideal settings.

Here are mine.

Mio P350 + TTN5.21

Windows Settings.

Start – Settings - System - GPS
Programs - GPS Program port = COM4
Hardware - GPS hardware port = COM2
Baud rate=4800
Access - Manage GPS automatically = unticked.

Winfast Navigator Settings.

Tools – Port Setting.
NMEA. Port GPS_HW COM2: Baud Rate 4800

Tools – Command
Reset mode. Factory
Messages. Enable raw track data. Ticked. Enable development data. Ticked.

NMEA BaudRate 4800. GGA 1, GLL 0, GSA 5, GSV 5, RMC 1, VTG 0, MSS 0.

SiRF BaudRate 38400. Data Bit 8. Stop Bit 1. Parity N

Inside TomTom, choose Other NMEA GPS, 4800baud and GPS_COM.

If you are new to Winfast Navigator, make sure you go to Tools – Disconnect before Exiting the program.
_________________
Formerly known as Lost_Property
And NO that's NOT me in the Avatar.

[Border_Collie]

_________________
Formerly known as Lost_Property
And NO that's NOT me in the Avatar.

[Border_Collie]

Just to add to the above. I was surfing when I came across some info. regarding TTN5.21. Evidently it only uses GSV, GSA and RMC, so I experimented and changed mine to:-

GGA 0, GLL 0, GSA 5, GSV 5, RMC 1, VTG 0, MSS 0

and it still works fine, I have mine set up inside, near the patio door, and have a lock on 10 of the 11 satellites in view.

All I have to do now is test it in the car tomorrow.
_________________
Formerly known as Lost_Property
And NO that's NOT me in the Avatar.

We see you’re using an ad-blocker. We’re fine with that and won’t stop you visiting the site.
Have you considered making a donation towards website running costs?.
Or you could disable your ad-blocker for this site. We think you’ll find our adverts are not overbearing!