Speed Camera Database and PDA 2210 with TT5 PLEASE HELP

druid · Occasional Visitor Joined: Dec 17, 2005 Posts: 15

Please me out here guys.
I want to put the speed camera database on my HP 2210 PDA to run with TT5.
Can anyone please what file I need to download (a link to it would be great) and also a guide if poss.
As I am very new to PDA and TT5
Many Thanks

mikealder · Posted: Tue Jan 17, 2006 10:29 pm Post subject:

Try using the link from the home page of the site, it will take you to the area you need, download it, and install the files you need (OV2 and BMP for each camera type/ speed) there are instructions on this page - Mike

druid · Occasional Visitor Joined: Dec 17, 2005 Posts: 15

Hi
Thanks for the reply.
What link do I use as there are many links there and also what file do I use?
Do I have to download them all separtly or do they come in one folder?

Privateer · Posted: Tue Jan 17, 2006 10:46 pm Post subject:

Hi druid,

There are some guides that should be read (in the following order):

The beginner’s guide to the PocketGPSWorld camera database.
This explains about the different camera types and about categories and subcategories, so that you can decide how you want the database on your unit.

Depending on whether you have TomTom Navigator on a Pocket PC or TomTom GO, please read either:

How to install (camera database) POIs to TomTom Navigator 5.
This guide explains how to load the PocketGPSWorld camera database onto a Pocket PC running TomTom Navigator 5.

How to install (camera database) POIs onto a TomTom GO, Rider, or One.
This guide explains how to load the PocketGPSWorld camera database onto your TomTom GO, Rider, or One.

Once you have installed, set up, and used the PocketGPSWorld camera database for a while on your TomTom SatNav system. You may want to share and send in details of cameras yourself. You can do this by using the PocketGPSWorld POI Capture utility:

The PocketGPSWorld POI Capture utility.
You do not need the PocketGPSWorld POI Capture utility on your TomTom SatNav system in order to use the PocketGPSWorld camera database. However if you want to send in camera details then POI Capture makes the process of recording cameras much easier on TomTom Navigator and GO (original, 300, 500, and 700). At the moment POI Capture will not work with TomTom Rider, One, and mobile. This is for a technical reason, which we hope, will soon be rectified by TomTom.

The above guides may look lengthy and complicated when first seen. However if you grab a cup of coffee and read each one thoroughly then they should make sense as they have been written in a step-by-step way, for ease of reading.

Regards,
_________________
Robert.
iPhone 6s Plus, iOS 14.0.1: iOS CamerAlert v2.0.7
TomTom GO Mobile iOS 2.3.1; TomTom (UK & ROI and Europe) iOS apps v1.29
Garmin Camper 770 LMT-D

druid · Occasional Visitor Joined: Dec 17, 2005 Posts: 15

Thanks for that
I have read them and followed the links but not sure what files I need

Privateer · Posted: Tue Jan 17, 2006 10:53 pm Post subject:

	PocketGPS
	Web