ttn5 problems with mitac mio 168

slim · Occasional Visitor Joined: Sep 12, 2005 Posts: 1

hello gents

I hope someone can help me with this problem.

whilst using ttn5 on my pda the screen froze and i had to switch it off from the back and then back on again (didnt take card out). When i take card out an put back in ttn5 reloads and takes me through a few preferences. When i get to the voice preference an press select it just freezes again an nothing happens. I left it like this for an hour just in case it took a while to upload, but stil nothing. Any ideas?

Also I will probably have to re-establish my GPS settings so sats are picked up any idea of the settings procedure with a mio 168(built in reciever) i've forgot how i did it.

thanks
slim

lbendlin · Posted: Mon Sep 12, 2005 10:41 pm Post subject:

check your SD card for corruption (use a PC and card reader)

The GPS is "other BT GPS" at "4800" port "SP2"
_________________
Lutz

Report Map Errors here:
TomTom/TeleAtlas NAVTEQ

lamplight · Regular Visitor Joined: Sep 13, 2004 Posts: 130

As you're using the Mitac 168, the first selection should be Other Cable NMEA Gps then as above.

	PocketGPS
	Web