Gruff Occasional Visitor
Joined: Sep 10, 2005 Posts: 2
|
Posted: Sat Sep 10, 2005 3:52 pm Post subject: Rikaline 6010 Flashing but no position data |
|
|
I have two Rikaline 6010 Gps receivers which have
worked great for the last 2 years.
Now one of them when first switched on starts flashing
straight away, I seem to receive data from the serial port but
the receiver sends no position data.
Here is the data I get back from the device, can anyone please
advise me as to what has gone wrong and what I can do to get it
working again.
Version 220.006.000ES-05411
$TOW: 0
$WK: 1151
$POS: 6378137 0 0
$CLK: 96389
$CHNL:12
$Baud rate: 4800 System clock: 12.277MHz
$HW Type: S2AR
$GPGGA,235948.000,0000.0000,N,00000.0000,E,0,00,50.0,0.0,M,,,,0000*3A
$GPRMC,2$GPGGA,235948.000,0000.0000,N,00000.0000,E,0,00,50.0,0.0,M,,,,0000*3A
$GPRMC,235948.000,V,0000.0000,N,00000.0000,E,0.00,,260102,,*0C
$GPVTG,,T,,M,0.00,N,0.0,K*7E
$GPGGù$Version 220.006.000ES-05411
$TOW: 0
$WK: 1151
$POS: 6378137 0 0
$CLK: 96389
$CHNL:12
$Baud rate: 4800 System clock: 12.277MHz
$HW Type: S2AR
$GPGGA,235948.000,0000.0000,N,00000.0000,E,0,00,50.0,0.0,M,,,,0000*3A
$GPRMC,235948.000,V,0000.0000,N,00000.0000,E,0.00,,260102,,*0C
$GPVTG,,T,,M,0.00,N,0.0,K*7E
$GPGGù$Version 220.006.000ES-05411
$TOW: 0
$WK: 1151
$POS: 6378137 0 0
$CLK: 96389
$CHNL:12
$Baud rate: 4800 System clock: 12.277MHz
$HW Type: S2AR
$GPGGA,235948.000,0000.0000,N,00000.0000,E,0,00,50.0,0.0,M,,,,0000*3A
$GPRMC,235948.000,V,0000.0000,N,00000.0000,E,0.00,,260102,,*0C
$GPVTG,,T,,M,0.00,N,0.0,K*7E
$GPGGù$Version 220.006.000ES-05411
$TOW: 0
$WK: 1151
$POS: 6378137 0 0
$CLK: 96389
$CHNL:12
$Baud rate: 4800 System clock: 12.277MHz
$HW Type: S2AR
$GPGGA,235948.000,0000.0000,N,00000.0000,E,0,00,50.0,0.0,M,,,,0000*3A
$GPRMC,235948.000,V,0000.0000,N,00000.0000,E,0.00,,260102,,*0C
$GPVTG,,T,,M,0.00,N,0.0,K*7E
$GPGGù$Version 220.006.000ES-05411
$TOW: 0
$WK: 1151
$POS: 6378137 0 0
$CLK: 96389
$CHNL:12
$Baud rate: 4800 System clock: 12.277MHz
$HW Type: S2AR
$GPGGA,235948.000,0000.0000,N,00000.0000,E,0,00,50.0,0.0,M,,,,0000*3A
$GPRMC,235948.000,V,0000.0000,N,00000.0000,E,0.00,,260102,,*0C
$GPVTG,,T,,M,0.00,N,0.0,K*7E
$GPGGù$Version 220.006.000ES-05411
$TOW: 0
$WK: 1151
$POS: 6378137 0 0
$CLK: 96389
$CHNL:12
$Baud rate: 4800 System clock: 12.277MHz
$HW Type: S2AR
$GPGGA,235948.000,0000.0000,N,00000.0000,E,0,00,50.0,0.0,M,,,,0000*3A
$GPRMC,235948.000,V,0000.0000,N,00000.0000,E,0.00,,260102,,*0C
$GPVTG,,T,,M,0.00,N,0.0,K*7E
$GPGGù
This sequence seems to keep repeating
Any help would be grateful |
|