Com port settings

[Keans7]

Does anyone know what com port settings TTM looks for. I belive its 5 and 6 but my pda has lock my Leadtek 9537 to 8 and 10. Does anyone know which port it looks for and how I can change my GPS reciever back.

Thanks

[lbendlin]

Settings on the PDA have nothing at all to do with the settings on the Smartphone.

Go to Start > Configurations > BTSerialPortSetup and make sure the checkboxes are both set (you will need the Outbound COM port which mostly is COM7).

The CoPilotSmartphone forum has the sequence how this needs to be setup. You will fail if you don't follow those instructions.
_________________
Lutz

Report Map Errors here:
TomTom/TeleAtlas NAVTEQ

[Darren]

[Keans7]

Sorry, TTM was working fine on my 6600 with the Leadtek 9537 reciever. I then set up TT Nav 3 on my friends PDA using my 9537, which again worked fine. I then ran the TTM back on my 6600 but the 9537 will now not talk to the 6600. The reciver flashes blue and green for the sats but the TTM says "No valid GPS device".

I think in some way I have altered the com port settings on the 9537 and TTM cannot see it.

Any Ideas?

We see you’re using an ad-blocker. We’re fine with that and won’t stop you visiting the site.
Have you considered making a donation towards website running costs?.
Or you could disable your ad-blocker for this site. We think you’ll find our adverts are not overbearing!