Yakumo PDA Delta 300 GPS - again

nicknamealreadytaken · Occasional Visitor Joined: Sep 27, 2004 Posts: 10

I have just loades TT3 onto this system and all appears tobe well.......... Apart from the fact that it wont pick up a sattelite........ Can anyone tell me if the GPS receiver on the Delta 300 is similar to any in the TT3 scroll down list or am I just a fool that was easily parted from his money?

Should I just forget TT3 and reload the Marco polo navigation kit?

Regards

Loster than a lost thing

Darren · Posted: Tue Sep 28, 2004 7:41 am Post subject:

What receiver came with this? If it's the Royaltek Sapphire then it may be the same issue that the Medion had, i.e. you needed to reprogram the GPS to output the NMEA Sentences required, see this thread and follow the guide I posted.
_________________
Darren Griffin

lance · Occasional Visitor Joined: Sep 28, 2004 Posts: 1

When installed TT3 on your yakumo delta 300 GPS, open TomTom GPS and change to following settings.

NMEA 0183v2 4800
Serial Cable on SP2

Give the box on the left a vink and ure ready to go :D
Click on the Status tab and see if u are getting any satelite conections.

nicknamealreadytaken · Occasional Visitor Joined: Sep 27, 2004 Posts: 10

Thanks for the replies guys. Lance, followed your advice first as it seemed the easy option. Bingo the GPS was communicating. Just got to reload the maps again and hopefully I am fully functional. Shall test it out on the way to the Kebab shop later.............

Regards

Jon

professorpool · Posted: Sat Dec 11, 2004 10:25 am Post subject:

I am considering this also, so was wondering if it worked??
_________________
My wife says I can't be late anymore Sad

	PocketGPS
	Web