Are you using XTracV2 but can't get data to flow into TT3 ??

hijacker · Regular Visitor Joined: Dec 20, 2003 Posts: 188

Does your ClipOn appear to have made a Bluetooth connection but no data is flowing through to TT3, Navigon etc...?

For me this applied for 2 different ClipOn's. Once just recently purchased with the latest Xtrac already on it and an older ClipOn that was flash upgraded.

When TT3 has loaded, you should see no activity in GPS STATUS. (Using driver NMEA 38400).

Goto to the Bluetooth Manager and you should see that despite the blue flashing light a bluetooth connection has not in fact been made, so make a manual connection and it will then ask you to input your passkey. Type this in ("0000") press enter and then your Ipaq will bond to your ClipOn and hey presto data flows through and continues to do so.

I've found this to work on two different Ipaq's (both 2210's)
_________________
TT GO 1005

TC · Posted: Mon Jul 19, 2004 8:47 am Post subject:

Hijacker,

I'm using a Clip-on that's been upgraded and it seems to works fine with TT3.

In Bluetooth Manager delete the Clip-on short cut and then go to paired devices and delete ClipOn-BTGPS. Now create a new connection and paring and I think you ill be OK

TC
_________________
Ipaq 2210
Fortuna Clip-on [Xtrac V2]
Tom Tom Navigator 3
Memory Map

gokhart · Posted: Mon Jul 19, 2004 5:40 pm Post subject:

I have a 2210, but have not got this problem. Maybe it's the way you setup the initial connection/pairing ??

T_E_O · Occasional Visitor Joined: Jul 21, 2004 Posts: 1

Try using SiRF 38400 instead of NMEA, because in ST as well as in XT mode, the clip-on speaks SiRF, not NMEA.

	PocketGPS
	Web