ipaq rz1710 tom tom navigation pack. no gps device

mikealder · Posted: Mon Sep 05, 2005 3:48 pm Post subject:

Have you tried it set to COM3 or S2410 COM1 and use the same BAUD speed that wtks on the old ipaq - You havn't turned on the "recieve all beams" in connections IRdA or loaded up an external keyboard driver software by any chance? only asking cos its a couple of weeks since we last tried to get this working - Mike

stevei · Posted: Mon Sep 05, 2005 6:43 pm Post subject:

I have read somewhere on this forum that the 1715 does not have a comm 1 and if you are using a cradle with a hardwired GPS this will be on comm 1. Sad

_________________
Steve I

Darren · Posted: Tue Sep 06, 2005 11:02 pm Post subject:

The rz1715 is exactly the same as the rz1710. HP use the xxx0 and xxx5 numbering to track orders sold through corporate and other channels.
_________________
Darren Griffin

lupos0_1 · Posted: Thu Sep 08, 2005 5:00 pm Post subject:

Hi there, new to the site Laughing

I had the same problem on my Ipaq. Turned out that the windscreen of my car has a reflective coating which stopped the signal from getting to the GPS Receiver. I tried putting the receiver up by the rear view mirror (that is where the window has a patch of black dots (technical I know Mr. Green

)

Anyway, the result is that the unit and ttn 5 are both working perfectly.

Also, are you waiting long enough for your unit to get a first lock Question

You should be in a clear space (no trees or houses too close) where the receiver can get a good line of sight of the sky for a period between 45seconds and 4 minutes (depending on your receiver).

Hope this helps a little Driving

	PocketGPS
	Web