Ash10's Camera Manager Software

[dales]

Hi deeranwith,

PoiLoader 2.6.1 works just fine with my wav files every week.

The only problem I encountered was, when it installed itself, it put itself into C:/Program files/Garmin (rather than C:/Garmin previously). So I had to move sox.exe to the new folder before wav files would load up.

Dales.
_________________
nuvi 2599LMT-D, oregon 700, basecamp, memory-map.

[deeranwith]

Thanks Dales

I had not spotted the change of location. After the install the C:\Garmin dir was still there but with only the sox.exe present!

I did have to move it to the C:|Program Files\Garmin\POI Loader dir before it worked.

Thanks for the help.

Mark

[Ash10]

Camera Manager v3.51 beta now available

This fixes the bug with the Apply button not being enabled after changing settings on the Voice or Account tabs.

Note that any changes to the Account settings will have no effect until the next scheduled check for updates - remember that you can use Check Now from the system tray icon to force a check.

Download link below (same as before).

[grayfor]

I have tried to download the latest version using the link at the top of this subject but my ###***** browser opens a blank page instead of downloading the program....

What am I doing wrong??

[BAVC10]

Hi Ash10

I wonder is the PGPSW team have changed the settings with the latest speed camera file as I get the following error with 3.5 and 3.51 beta....

Error opening pgpsw-speed-cams-uk (or .eur).zip for reading and error opening output.csv. for reading.

Strange as 3.5 worked perferctly and I haven't changed any settings on my browser.

Cheers
_________________
DriveLuxe 51 LMT D - Firmware 6.80
Previously owned: DriveLuxe 50 LMT-D, NuviCam LMT-D, Nuvi 3598 LMT-D, Nuvi 3490LMT, 3790T, 1690, 765, 760, 660, 610, 360, 310, 300 and Streetpilot i3

[MaFt]

[BAVC10]

Hmmmmmm thanks for the reply. Just wondered as I noticed one of your recent posts asked Ash if the ' workaround' could be removed.

I'll see what Ash10 comes back with

Cheers
_________________
DriveLuxe 51 LMT D - Firmware 6.80
Previously owned: DriveLuxe 50 LMT-D, NuviCam LMT-D, Nuvi 3598 LMT-D, Nuvi 3490LMT, 3790T, 1690, 765, 760, 660, 610, 360, 310, 300 and Streetpilot i3

[MaFt]

[Ash10]

[BAVC10]

Ash10
Not that I can think of! CM3.5 worked first time but CM3.51 displays the error messages and when I went back to CM3.5 that no longer worked - hence why I wondered if PGPSW had changed anything or there was a "legacy" setting in CM 3.51 which affected previous settings. I'll completely remove all versions and edit the registry and try a "clean" install.

Thanks for the reply though.
_________________
DriveLuxe 51 LMT D - Firmware 6.80
Previously owned: DriveLuxe 50 LMT-D, NuviCam LMT-D, Nuvi 3598 LMT-D, Nuvi 3490LMT, 3790T, 1690, 765, 760, 660, 610, 360, 310, 300 and Streetpilot i3

[Ash10]

[BAVC10]

Ash10

Think you've hit the nail on the head.

I ran CM yesterday afternoon with no success, ensured I changed no settings and ran again this morning following the new PGPSW database release - SUCCESS!

I was "testing" the 'Apply' button issue and did change regions from UK to Europe and back again during the testing so your diagnosis would seem to be correct.

Looking forward to the fix.
_________________
DriveLuxe 51 LMT D - Firmware 6.80
Previously owned: DriveLuxe 50 LMT-D, NuviCam LMT-D, Nuvi 3598 LMT-D, Nuvi 3490LMT, 3790T, 1690, 765, 760, 660, 610, 360, 310, 300 and Streetpilot i3

[BAVC10]

Ash 10

I have found another potential "bug". When you first run CM the Last Checked box updates with the new details. If you then change any setting (eg use own icons or include direction if known) the database updates exactly as it should but the Last Checked box doesn't update.

Under normal "weekly update" use you probably wouldn't change settings after initial set up but thought it might be worth reporting and seeing if you can 'sync' the information to reflect the 'true' last checked info.

This really is a great programme which makes updating a breeze
Cheers
_________________
DriveLuxe 51 LMT D - Firmware 6.80
Previously owned: DriveLuxe 50 LMT-D, NuviCam LMT-D, Nuvi 3598 LMT-D, Nuvi 3490LMT, 3790T, 1690, 765, 760, 660, 610, 360, 310, 300 and Streetpilot i3

[Ash10]

[BAVC10]

Ash10

Thanks for the reply - follow your logic about the download but I wonder if it would enhance the program if you included an extra box in the directories tab under POI Directory for something like Last setting changes???
_________________
DriveLuxe 51 LMT D - Firmware 6.80
Previously owned: DriveLuxe 50 LMT-D, NuviCam LMT-D, Nuvi 3598 LMT-D, Nuvi 3490LMT, 3790T, 1690, 765, 760, 660, 610, 360, 310, 300 and Streetpilot i3

We see you’re using an ad-blocker. We’re fine with that and won’t stop you visiting the site.
Have you considered making a donation towards website running costs?.
Or you could disable your ad-blocker for this site. We think you’ll find our adverts are not overbearing!