tomtom 5 software with navman jacket 3000 & ipaq 3900 pr

bullterrier · Occasional Visitor Joined: Apr 03, 2005 Posts: 14

i have a navman jacket 3900 * a ipaq 3900 unit and trying to put tt5 software onto unit
i have got the software onto the unit & tried to setup tt5 and on the sat set up i have the disc turning but to no avail does it show any sat navs even outside for 20 mins nothing showing

please could anyone help me Sad

lbendlin · Posted: Sun Dec 11, 2005 2:33 pm Post subject:

your jacket may be set to SiRF protocol. Reprogram it to NMEA
_________________
Lutz

Report Map Errors here:
TomTom/TeleAtlas NAVTEQ

trevor.dowle · Lifetime Member Joined: 16/06/2003 05:22:14 Posts: 412

Tim Buxton · Posted: Sun Dec 11, 2005 3:34 pm Post subject:

I have the same kit and I do have mine with me. Do you have the Navman 3.1.6 driver installed? Configure the GPS as 'Other NMEA GPS', set the baud rate to 57600 and select Navman driver as the port. This works on my 3970 with Navman SE sleeve with the firmware update. Tomtom version is 5.420.
_________________
Tim

bullterrier · Occasional Visitor Joined: Apr 03, 2005 Posts: 14

i have it set to other nmea and set the baud rate to 57600
and still got the problem

Please could you help me further

Tim Buxton · Posted: Sun Dec 11, 2005 8:31 pm Post subject:

I can try. It took me ages to get a fix. Was Navman Driver at the top of the list of the Comport options?
_________________
Tim

bullterrier · Occasional Visitor Joined: Apr 03, 2005 Posts: 14

yes it was

bullterrier · Occasional Visitor Joined: Apr 03, 2005 Posts: 14

tim what is the firmware update

Tim Buxton · Posted: Sun Dec 11, 2005 9:21 pm Post subject:

Have you any other GPS software you can try? Navman have GPSInfo which will tell you if the GPS is actually receiving anything. Get it here.
_________________
Tim

Tim Buxton

bullterrier · Occasional Visitor Joined: Apr 03, 2005 Posts: 14

the info is showing nothing at all
my tomtom 5 on the gps is set at 57600 and the disc is moving around but showing no sats

bullterrier · Occasional Visitor Joined: Apr 03, 2005 Posts: 14

Tom
I have tried to go into start-settings-connections- and it only shows beam & connections no gps at all is this where i have the problem ?

Tim Buxton · Posted: Sun Dec 11, 2005 11:30 pm Post subject:

Tom? You got two people helping you? Laughing

Anyway, when I run GPS info it shows two sats (I'm indoors) and doesn't have a clue where I am! At the bottom of the screen it shows

Installed Drivers:
Navman

and

Active: Navman (Com4; 57600)

Below that it shows the receiver software version of 2.3.7

Does yours have anything like this? Try a soft reset first.
_________________
Tim

bullterrier · Occasional Visitor Joined: Apr 03, 2005 Posts: 14

installed drivers:navman
active navman (com4: 57600)
reciever sw version:
2.1.1 mo1325 bw a navman ipaq 2.1.0

Tim Buxton · Posted: Sun Dec 11, 2005 11:37 pm Post subject:

It sounds as though yours is the older sleeve. Does it have an external antenna socket?
_________________
Tim

	PocketGPS
	Web