Safety camera downloads

[Olly1943]

I have downloaded and successfully loaded the safety camera software for my iCN 635, but their are seveal other files witin the csv folder what do they do? Also is there a voice warning for speed camera or just the beep that I get now?

Thanks in advance,

olly1943

[icsys]

Hi, welcome to the forums.

The csv files are as follows:

pocketgps_uk_gatso.csv - entire fixed gatso camera database
pocketgps_uk_specs.csv - additional specs cameras
pocketgps_uk_redlight.csv - cameras located at traffic lights
pocketgps_uk_temp.csv - cameras that are temporary such as at roadworks
pocketgps_uk_mobile.csv - cameras that are not fixed but in specially adapted vans but likely to be in the same location at peak times.

You can choose to install any one or all of the above files.
-------------------------------------------------------------------------------------

Instead of the above you can choose to install:

pocketgps_uk_gatso_30 / 40 / 50 / 60 / 70 which are speed related files.
The beauty of these is that you can have a different icon for each file such as a speed icon to tell you the speed limit for the camera.

pocketgps_uk_gatso_tba.csv are the rest of the cameras, to make up the full database, for which the speed is not currently known.

The pocketgps_uk_mobile_30 - 70 are exactly the same but for the cameras that are mobile.

You will need to install ALL the speed range 30-70 PLUS the tba file
-------------------------------------------------------------------------------------

pocketgps_continental.csv - are known speed camera locations in continental Europe.

-------------------------------------------------------------------------------------

You can change the Custom POI warning to another sound of your choice but it will require access to the devices system files. The same sound will play for ALL POI's that you set to give an audible alert.

On an iCN, the POI alert sound is called default.wav
Via ActiveSync, locate the default.wav file. It should be in the following directory:
/storage card/Navman/MyPOI/
Rename the file to default-old.wav or silmilar.
Locate the Sound directory, Cut and paste your chosen file into it.

I dont have an iCN6xx so cannot help with installation but if you have problems just post back and i'm sure someone with an iCN6xx will be able to help further.
_________________
Ian.
iPAQ 2210 | Navman 4100 BT Receiver
Navman iCN 635
TomTom GO
Anquet OS mapping

We see you’re using an ad-blocker. We’re fine with that and won’t stop you visiting the site.
Have you considered making a donation towards website running costs?.
Or you could disable your ad-blocker for this site. We think you’ll find our adverts are not overbearing!