Search found 26 matches

I have version 7.7.0.134 on my HP iPAQ PDA.

I have version 7.7.0.134 on my HP iPAQ PDA.

I have gone through the POI loading precedure again on my PPC and it works. The custom POIs can be selected and used OK (though they are not displayed on the map). I have version 7.7.0.134 of CoPilot. ...

To get your custom POIs and CoPilot-supplied safety cameras loaded:

1. Sync to the PC, make sure CoPilot is not running and delete all the AO*.* files in Storage Card/CoPilot/EU/Save

2. Copy the ...

I have found the same problem with both CoPilot 6 and 7.

The routing is very reluctant to use smaller roads (especially if they are roads with no name), even when instructed to do so by carefully- ...

You can configure the time before the turn that the "Just Ahead" warning is given.

Didn't know there were any toll roads around Trafalgar Square?

Perhaps you mean the London Congestion Charge?

There may be other ways, but what I would do is turn the PPC sound volume down to zero before I start CoPilot.

1. Exit CoPilot
2. Delete all the files in the Save folder that have names matching AO*.*
3. Copy your desired .ov2 and .bmp files into the Save folder.
4. Start CoPilot.

Hope this helps.

I have been able to use the CoPilot gps tracks in two ways:

1. Import into Fugawi Global Navigator and see the track overlaid onto a road map.

2. Import into Google Earth and fly along the track ...

If you want to feed the GPS data stream to more than one application at a time, you need the GPSGate utility, or something equivalent.

I suspect you are not going to like this! Copilot Live 6 gives:

Quickest route:
M3, M25, M1, M6, M6 Toll, M6

Shortest route:
M3, A34, A419, A417, M5, M6

These routes are with default settin ...

I stumbled upon this problem last week, when getting CoPilot 6.0.1.68 to give me a route between the Oxfordshire villages of Fringford and Cottisford (as part of a longer route). The route that CoPilo ...

Just for the record, more than half the postcodes I have wanted to use have been out by a few miles in CoPilot 6. They have been reported to ALK as they have come up.

Some of these cases were for a ...

you probbably need to turn static navgation off on the gps receiver

I believe static navigation is off by default and should be off for usage at walking speed. To have it on would make position rep ...

I have CoPilot 6.0.1.68 used with an iPAQ 5550 and a GlobalSat BT338, used mainly for vehicle navigation. Recently I used this combination in Walking mode and found it almost unusable because the disp ...

	PocketGPS
	Web