Search found 9 matches

on the way to you. nice piece of info to have.
pay attention to page 7 where you can read the inscription.
the gps unit is featuring in almost all pages/pics.

i have an eachy finger begging me to open the unit but this will void the guaranty and i'll have not a chance in hell to return it.
i have a pdf file "x500 stripped" where i can clearly see the gps u ...

right now:
gps program port; com2
gps hardware port: com4/baud rate 57600
access: manage gps automatically (tried also with this option off-no change)

yep...moving smoothly but still no reception or fix.
nmea 57600-same results...dots moving.
sirf 57600 on com2-same results (tried com2 becouse is the port for my external, bt receiver)

i did. choosed
nmea 0183v2 4800 on the upper window
and
gps device on the lower window
status: "dead"

winfast lets my gps in nmea.
could it be a hardware issue. antenna disconnected???
i'll try the driver, i'll try a 5 ton hammer if there is any chance to make it work... Laughing Out Loud

feel like smashing someth ...

ooops is 1
and another thing, is it safe to use the driver you are suggesting?
my ppc is an e-ten, x500, working now, again in wm5.
thank you.

thank you for your time and desire to help. greatly appreciated.
using winfast navigator:
1. port settings :com4, 57600 (all gps programs are detecting my internal gps on this port, at this baudrate ...

professional help needed badly. i bought ppc, e-ten x500 with buil-in gps. after changing the rom to wm6 (official rom, from the e-ten site) all my gps progs died on me.
for example my i-go detects ...

	PocketGPS
	Web