Search found 32 matches

In store we have recently received several TomTom Go units and the text is in Danish and this is presenting a problem.
All previous units have been in English. I recall reading that there is a UK sup ...

If you mean 'automatic re-planning' then the answer is 'YES'

The one way street was only an example. What I tried to get across was that when you deviate from the original route, the program does not set up a 're-route'

Strange that you should mention this because I have just spoken to a friend and he has experienced the same problem. I have noticed that this also happens when using the postcode facility. After a jou ...

We went to a show in West Cowes and set TT3 to go from Newport to the Esplanade which is near to Bath Rd. As we neared Cowes it began to lock up. At one stage, after I had done a soft reset and chec ...

Thanks for the reply Dave. There were a number of problems which made me wonder if the program was at fault. For example I would program a route and as soon as I set off I would be told 'you have reac ...

I have just spent a few days on the Isle of Wight and you would not believe the problems that I had. I took 2 PDA's both loaded with TT3 in case the problems were hardware rather that software based. ...

I have posted this elsewhere but it may be of interest to you who are experiencing problems with the maps:
Ok so I would like you all to try this. In TT3 in the 'from' box type in GLOUCESTER. You wil ...

Thanks Niels, at least you understood the problem. It's funny that you should mention TT2 as I also use that on another PDA and the postcode works fine on that unit. You may well ask why I do not alwa ...

Ok I'll try and make it as simple as I can. When the PDA is not connected to the receiver the Postcode program will not work. When I type in a Postcode the error message is: "failed to show on map" Ho ...

I thought that I had made it clear in the second sentence. Yes I was meaning the postcode program. So if it will not work until I am live then does anyone know the reason? I have installed it three ti ...

I have just had to install TT3 on a new PDA. I seem to remember that when I used the postcodes in my other machine the program would run even though it was not connected to the PDA.
When I now try it ...

Appreciate it may be too late but I have only just read of your problem. The simplest and safest way is to buy an cigar lighter extention lead and swop over the connections in either the plug or the s ...

One school of thought is to try Maplins. However the answer is simple. You say that you can obtain a timer that is capable of switching 5 watts. Well this can be used to switch a relay with heavier co ...

I have TT3 wired version using a Toshiba e350 and it really is a pain! All those trailing cables are not favoured by 'her in doors'! Does anyone know where I can get the supply cable in straight form ...

	PocketGPS
	Web