Search found 9 matches

Okay, Tried mapopolis and it works an absolute treat. :D

I guess my next move is to re-install the medion software.
Failing that I will have to look at another package - any suggestions...??
...

Thanks for the tip.

Will try this over the next day or so and will post results.....

Thanks again.

Absolutely nothing else running at all.
Even after a soft reset, no change.....

Bizarre...eh?

I think the logger wasn't working right...

I actually get:

GGA 1 message every sec
GSV 3 messages /sec
RMC 1 message /sec
GSA 1 message /sec

but have now changed these to your suggested se ...

There were also some GPRMC, GPGSV and GPGGA messages too

Here are a few lines garnered from GPS Dash

$GPGGA,004754,5050.705078,N,00105.1170,W,1,08,1.1,203.9,M,48.0,M,,*50
$GPVTG,149.9,T,149.9,M,0019.5,N,0036.0,K*46
$GPGGA,004755,5050.701660,N,00105.113 ...

This is bizarre.

Gps dash shows 5 sats, position etc...

Medion - nothing. Even though I have set up the correct comport (Com2: USBSER) and the baud rate is the same as GPSDash...

any ideas?

It does seem to work when I press OK but Medion still has "GPS!" in the top right corner - apparently this means that it cannot see the GPSr.

I am also using GPSdash - and I may be having some prog ...

Hi,

I have a tosh e400 running medion navigator and have recently purchased a rikaline gps receiver/charger cable.

I am having problems in getting the PDA to recognise the gps.

Thus far I ha ...

	PocketGPS
	Web