Nuvi 34xx, 35xx, 24x5, 25x5 7.60 Firmware (07/01/13)

BAVC10 · Lifetime Member Joined: Dec 20, 2005 Posts: 756

Garmin have just released firmware 7.60 for their 2012 models.

Changelog as below@
Changes from version 7.50 to version 7.60:
Fixed several Arabic text formatting and display errors.
Improved results returned from searches.
Fixed an error that caused routes not to highlight.
Fixed a communication issue on some non-US mobile networks.
Improved software stability.

Link to 34xx download page
http://www8.garmin.com/support/download_details.jsp?id=5303

Link to 24x5 / 25x5 download page
http://www8.garmin.com/support/download_details.jsp?id=5337

Or via webupdater
_________________
DriveLuxe 51 LMT D - Firmware 6.80
Previously owned: DriveLuxe 50 LMT-D, NuviCam LMT-D, Nuvi 3598 LMT-D, Nuvi 3490LMT, 3790T, 1690, 765, 760, 660, 610, 360, 310, 300 and Streetpilot i3

Kremmen · Posted: Thu Jan 10, 2013 12:11 pm Post subject:

No sign of them adding the ability to reset the trip log on the 30/40/50 then ? Sad

_________________
DashCam:
Viofo A119 V3

sussamb · Posted: Thu Jan 10, 2013 2:31 pm Post subject:

Patience glasshopper Laughing

Kremmen · Posted: Thu Jan 10, 2013 4:09 pm Post subject:

_________________
DashCam:
Viofo A119 V3

steve999gps · Occasional Visitor Joined: Jan 08, 2013 Posts: 5

And no way to mute the spoken navigation prompts, whilst still retaining the audible safety camera prompts.
I reall want to do that on my 2595 LMT like I could on my old 760

sussamb · Posted: Fri Jan 11, 2013 9:43 pm Post subject:

This might help you. I understand that you can create a 'silent voice file' using it.

http://turboccc.wikispaces.com/Downloads

steve999gps · Occasional Visitor Joined: Jan 08, 2013 Posts: 5

Thanks - I will take a look and might have a go - although I am not very tech savvy. Would be great if someone had created a silent voice and was willing to share. I have searched, but with no luck. Thanks again anyway.

steve999gps · Occasional Visitor Joined: Jan 08, 2013 Posts: 5

Hurrah! - Cracked the Silent Voice issue.
Used Garmin Voice Studio to create a silent vpm file.
In the tool, for each of the voice prompts, I imported a small, silent WAV file I found called silent-burst.wav. Even that showed some residual noise in the waveform dispaly, but there is a tool to "Trim" and you can easily trim a totally silent bit so the resulting waveform is totally flat-line. I did these for each and every of the voice commands. Then export the resulting file to the Nuvi and select it on the device.
Hey-presto - I can now follow a route with no voice commands, but I still get the audible safety camera alerts. Just as I wanted.

	PocketGPS
	Web