View previous topic :: View next topic |
Author |
Message |
Miles Occasional Visitor
Joined: Oct 10, 2005 Posts: 9
|
Posted: Sun May 28, 2006 10:37 pm Post subject: difficulty in connecting to Desktop |
|
|
Following my last post, I wondered whether downloading the latest updates from Navman would help. Alas I continue to experience a problem in that the Desktop program constantly tells me that there is a problem with my device and instructs me to switch it off and then on, but when connected through the uSB lead the device will not switch on or off. I have tried switching the USB lead between different ports and I have tried resetting the device - anyone any ideas please? The device does not register in my computer although a little icon appears on the taskbar saying (quite correctly) that a device has been detected any may not work properly. |
|
Back to top |
|
|
DRP Frequent Visitor
Joined: Mar 03, 2004 Posts: 353 Location: "The Green Green Grass of Home"
|
Posted: Mon May 29, 2006 10:44 am Post subject: |
|
|
Hi
You have activesync installed on the PC and its set up correctly. Do you get the red & green icon in the icon tray by the clock when connected. If you plug the iCN into the USB lead. Without starting SmartST, do you get the auto start activesync on the desk top? you should then get the blue USB screen on the iCN and a connection sound.
Try uninstalling active and SmartST and then reinstall active and then SmartST.
Hope this helps you.
Regards
DRP _________________ Sharing information is the key to a better understanding
Mio M400 WEU, N60I, T1, 2x B2, iCN 510 & lots more |
|
Back to top |
|
|
nortonbeak Regular Visitor
Joined: Oct 08, 2005 Posts: 186 Location: North East, England
|
Posted: Mon May 29, 2006 11:02 am Post subject: |
|
|
Miles
Do be aware that the Service Pack does not include any mapping updates. _________________ Navman ICN 520
512 Mb Cygnet SD card
Smart ST 2005 + SP 1 |
|
Back to top |
|
|
Miles Occasional Visitor
Joined: Oct 10, 2005 Posts: 9
|
Posted: Mon May 29, 2006 1:01 pm Post subject: ICN520 connection problem |
|
|
Thanks for advice - as you suspected - it is an active sync problem. I have a PDA connected in a cradle, so I needed to remove it so tht activesync had only one device - the navman to worry about. Even then connection is not immedediate and all sorts of dialogue boxes seem to appear before the connection materialises. The main thing is that I have got the thing to work - thanks
Miles |
|
Back to top |
|
|
|
Posted: Today Post subject: Pocket GPS Advertising |
|
|
We see you’re using an ad-blocker. We’re fine with that and won’t stop you visiting the site.
Have you considered making a donation towards website running costs?. Or you could disable your ad-blocker for this site. We think you’ll find our adverts are not overbearing!
|
|
Back to top |
|
|
|