GPS setup - no Cancel option

[SimonCatlin]

GPS setup - If the correct Com port is not available (such as you have forgotten to start GPSGate etc), you cannot cancel the setup, you go back to the speed where there is just a "done" button, go back again to the device, where there is only "select" on the GPS device select screen and no cancel option. Therefore, you are stuck in a loop. Because of the full screen mode (Which in my opinion is just plain wrong!), you cannot do anything else....except select the wrong com port, exit TTN5 and then start the Com port you want, re-start TTN5 and then re-setup the GPS.
_________________
iPhone5, TomTom, Google maps, Navfree, Viewranger and Apple Maps (ekk)

[lbendlin]

You can always use the hardware buttons to get to the operating system. A bit quirky but it works.
_________________
Lutz

Report Map Errors here:
TomTom/TeleAtlas NAVTEQ

We see you’re using an ad-blocker. We’re fine with that and won’t stop you visiting the site.
Have you considered making a donation towards website running costs?.
Or you could disable your ad-blocker for this site. We think you’ll find our adverts are not overbearing!