Does the speed camera database work with the Navman ICN 520?

alex_d · Occasional Visitor Joined: Dec 28, 2005 Posts: 6

Response much appreciated.

Thank you.

Alex.

MikeCooper · Occasional Visitor Joined: Dec 28, 2005 Posts: 5

alex_d = I'm having the same problem.

My NAVMAN 520 shows some Speed Cameras but not others. When it does show the cameras, I get no warning of the camera is approaching but it is shown on the map.

What have I done wrong been to http://www.pocketgpsworld.com/uksafetycameras.php for the latest downloads. I've up loaded the "pocketgps_uk_sc.* " file to my navman. Should I've done as requested just the "pocketgps_uk_gatso.* "

Any ideas out there ?

Apart from that I'm very impressed with the NAVMAN 520

Regards

Mike

alex_d · Occasional Visitor Joined: Dec 28, 2005 Posts: 6

I can't even get the POI file on to the device. It says 'No storage available on device'.

MikeCooper · Occasional Visitor Joined: Dec 28, 2005 Posts: 5

Hi,

Think i've sorted it out with my NAVMAN 520.

After using the SmartST program close this program, but keep the Microsoft Sync program open then click the explore button to view the files on your NAVMAN 520.

Copy the files you have copied over and place them in your
\Storage Card\Navman\MyPOI.

Then Start your NAVMAN 520.

Go into Preferences\My Data\My POI then view the imported files.
Then go in to your map view and see the POI's.

I've not tested them out specially the Speed Cameras, at least I can see them. Watch this Space for further reports.

Mike

MikeCooper · Occasional Visitor Joined: Dec 28, 2005 Posts: 5

Hi All,

as promised reporting back from my previous post.

I was driving down the A56 in Cheshire near Preston Brook and the NAVMAN 520 came to life with a speed camerea warning of a GATSO.

The above works.

Could do with changing the warning sound any ideas ?

Mike :D

Oldboy · Posted: Thu Dec 29, 2005 9:47 pm Post subject:

Unfortunately there can be only one warning sound for all the POI's. Sad

_________________
Richard

TT 910 V7.903: Europe Map v1045
TT Via 135 App 12.075: Europe Map v1120

alex_d · Occasional Visitor Joined: Dec 28, 2005 Posts: 6

Mike,

Which file did you copy to the Navman? Did you copy it straight from the downloaded database file?

Alex.

MikeCooper · Occasional Visitor Joined: Dec 28, 2005 Posts: 5

Alex,

All the files supplied in the "pocketgps_uk_sc_Nov05.zip"
csv files\other\pocketgps_uk_gatso.csv
\pocketgps_uk_specs.csv
\pocketgps_uk_redlight.csv
\pocketgps_uk_mobile.csv
\pocketgps_uk_temp.csv

Don't forget to remove the first line in wordpad and save the file.
then do the previous posted item by myself to copy them over to the NAVMAN 520

I've also imported other POI's from www.getoutguide.pwp.blueyonder.co.uk/poidownloads/
using the same method and they also show up on the NAVMAN 520.

Mike

Tim Buxton · Posted: Fri Dec 30, 2005 7:30 am Post subject:

alex_d · Occasional Visitor Joined: Dec 28, 2005 Posts: 6

I am having such trouble in getting POI's onto my Navman. I always get a message saying 'no storage available on device' from the POI editor. I have tried everything, even the technical support couldn't help. I'm not sure if i'm supposed to be using .asc or .cvs files but i've tried both. Anyone had this before or any advice?

Alex.

	PocketGPS
	Web